dmesg - Intel Core i7-4770
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000caecf000 end: 0x000000caeddfff
DMAR: RMRR base: 0x000000cb800000 end: 0x000000cf9fffff
DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
SCHED: No cpumask for kworker/1:0/16 weight 1
SCHED: No cpumask for kworker/1:0H/17 weight 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1
SCHED: No cpumask for kworker/2:0/21 weight 1
SCHED: No cpumask for kworker/2:0H/22 weight 1
#2
SCHED: No cpumask for kworker/3:0/26 weight 1
SCHED: No cpumask for kworker/3:0H/27 weight 1
#3
SCHED: No cpumask for kworker/4:0/31 weight 1
SCHED: No cpumask for kworker/4:0H/32 weight 1
#4
SCHED: No cpumask for kworker/5:0/36 weight 1
SCHED: No cpumask for kworker/5:0H/37 weight 1
#5
SCHED: No cpumask for kworker/6:0/41 weight 1
SCHED: No cpumask for kworker/6:0H/42 weight 1
#6
SCHED: No cpumask for kworker/7:0/46 weight 1
SCHED: No cpumask for kworker/7:0H/47 weight 1
#7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54274.89 BogoMIPS)
MuQSS locality CPU 0 to 1: 2
MuQSS locality CPU 0 to 2: 2
MuQSS locality CPU 0 to 3: 2
MuQSS locality CPU 0 to 4: 1
MuQSS locality CPU 0 to 5: 2
MuQSS locality CPU 0 to 6: 2
MuQSS locality CPU 0 to 7: 2
MuQSS locality CPU 1 to 2: 2
MuQSS locality CPU 1 to 3: 2
MuQSS locality CPU 1 to 4: 2
MuQSS locality CPU 1 to 5: 1
MuQSS locality CPU 1 to 6: 2
MuQSS locality CPU 1 to 7: 2
MuQSS locality CPU 2 to 3: 2
MuQSS locality CPU 2 to 4: 2
MuQSS locality CPU 2 to 5: 2
MuQSS locality CPU 2 to 6: 1
MuQSS locality CPU 2 to 7: 2
MuQSS locality CPU 3 to 4: 2
MuQSS locality CPU 3 to 5: 2
MuQSS locality CPU 3 to 6: 2
MuQSS locality CPU 3 to 7: 1
MuQSS locality CPU 4 to 5: 2
MuQSS locality CPU 4 to 6: 2
MuQSS locality CPU 4 to 7: 2
MuQSS locality CPU 5 to 6: 2
MuQSS locality CPU 5 to 7: 2
MuQSS locality CPU 6 to 7: 2
devtmpfs: initialized
evm: security.selinux
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb933f000-0xb9345fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xc9f21000-0xc9fe8fff] (819200 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
prandom: seed boundary self test passed
prandom: 100 self tests passed
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041B47B000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041B470800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041B444E00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7914000-0xf7917fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7900000-0xf790ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf791f000-0xf791f00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0c0-0xf0c7]
pci 0000:00:16.3: reg 0x14: [mem 0xf791d000-0xf791dfff]
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf791c000-0xf791c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7910000-0xf7913fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf791b000-0xf791b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf791a000-0xf791a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7919000-0xf79190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:1b06] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: BAR 3: assigned to efifb
pci 0000:01:00.1: [10de:10ef] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xb933f000-0xbbffffff]
e820: reserve RAM buffer [mem 0xb9c56000-0xbbffffff]
e820: reserve RAM buffer [mem 0xc9e4c000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc9f21000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
e820: reserve RAM buffer [mem 0x42e600000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 27736K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb533f000-0xb933f000] (64MB) mapped at [ffff8800b533f000-ffff8800b933efff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
simple-framebuffer simple-framebuffer.0: framebuffer at 0xf1000000, 0x300000 bytes, mapped to 0xffffc90002000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial 0000:00:16.3: enabling device (0000 -> 0003)
0000:00:16.3: ttyS1 at I/O 0xf0c0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
libphy: Fixed MDIO Bus: probed
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306c3, pf=0x2, revision=0x23
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (477195209, 0)->(482904843, -5709634)
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
evm: HMAC attrs: 0x1
Freeing unused kernel memory: 1244K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1280K
MuQSS CPU scheduler v0.162 by Con Kolivas.
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018c5000, 94:de:80:7f:55:9a, XID 0c900800 IRQ 27
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
SCSI subsystem initialized
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf791c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.0-14.1-liquorix-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf791b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.0-14.1-liquorix-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.0-14.1-liquorix-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.0-14.1-liquorix-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xc impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xf791a000 port 0xf791a200 irq 29
ata4: SATA max UDMA/133 abar m2048@0xf791a000 port 0xf791a280 irq 29
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: NCQ Send/Recv Log not supported
ata4.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: NCQ Send/Recv Log not supported
ata4.00: configured for UDMA/133
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
ata3.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: disabling queued TRIM support
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
ata4.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata4.00: Enabling discard_zeroes_data
sda: sda1 sda2 sda3 sda4 sda5 sda6
sdb: sdb1 sdb5
ata4.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: [sda] supports TCG Opal
sd 2:0:0:0: [sda] Attached SCSI disk
usb 3-6: new low-speed USB device number 2 using xhci_hcd
PM: Starting manual resume from disk
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 3-6: New USB device found, idVendor=046d, idProduct=c077
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: USB Optical Mouse
usb 3-6: Manufacturer: Logitech
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:046D:C077.0001/input/input0
hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6/input0
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
NET: Registered protocol family 10
usb 3-8: new low-speed USB device number 3 using xhci_hcd
Segment Routing with IPv6
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: System is tainted: local-hwclock
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
lp: driver loaded but no devices found
usb 3-8: New USB device found, idVendor=058f, idProduct=9410
usb 3-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-8: Product: KB800 Kinesis Freestyle
usb 3-8: Manufacturer: KINESIS FREESTYLE KB800
input: KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.0/0003:058F:9410.0002/input/input1
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
ppdev: user-space parallel port driver
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
hid-generic 0003:058F:9410.0002: input,hidraw1: USB HID v1.10 Keyboard [KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle] on usb-0000:00:14.0-8/input0
input: KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle as /devices/pci0000:00/0000:00:14.0/usb3/3-8/3-8:1.1/0003:058F:9410.0003/input/input2
systemd-journald[313]: Received request to flush runtime journal from PID 1
tsc: Refined TSC clocksource calibration: 3392.143 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5505274d, max_idle_ns: 440795301362 ns
hid-generic 0003:058F:9410.0003: input,hidraw2: USB HID v1.10 Device [KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle] on usb-0000:00:14.0-8/input1
lp0: using parport0 (interrupt-driven).
lp0: console ready
it87: Found IT8728F chip at 0xa30, revision 1
it87: Beeping is supported
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
input: PC Speaker as /devices/platform/pcspkr/input/input5
nvidiafb 0000:01:00.0: BAR 3: can't reserve [mem 0xf0000000-0xf1ffffff 64bit pref]
nvidiafb: cannot request PCI regions
EFI Variables Facility v0.08 2004-May-17
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
pstore: using lzo compression
pstore: Registered efi as persistent store backend
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
iTCO_vendor_support: vendor-support=0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
i915 0000:00:02.0: enabling device (0006 -> 0007)
[drm] Memory usable by graphics device = 2048M
checking generic (f1000000 300000) vs hw (d0000000 10000000)
[drm] Replacing VGA console driver
snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D2: inputs:
snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=mem
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:60: registered as cooling_device13
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
checking generic (f1000000 300000) vs hw (e0000000 10000000)
checking generic (f1000000 300000) vs hw (f0000000 2000000)
fb: switching to nouveaufb from simple
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: NVIDIA GP102 (132000a1)
[drm] Cannot find any crtc or sizes
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
Adding 16722940k swap on /dev/sdb5. Priority:-2 extents:1 across:16722940k SSFS
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
nouveau 0000:01:00.0: bios: version 86.02.39.00.86
nouveau 0000:01:00.0: Direct firmware load for nvidia/gp102/gr/sw_nonctx.bin failed with error -2
nouveau 0000:01:00.0: Falling back to user helper
FAT-fs (sda6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23
Process accounting resumed
input: lircd-uinput as /devices/virtual/input/input24
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
clocksource: Switched to clocksource tsc
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 242
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
nouveau 0000:01:00.0: gr: failed to load gr/sw_nonctx
nouveau 0000:01:00.0: gr ctor failed, -11
nouveau: probe of 0000:01:00.0 failed with error -11
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 387.34 Tue Nov 21 03:09:00 PST 2017 (using threaded interrupts)
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1400 at /build/linux-liquorix-4.14/drivers/pci/msi.c:1031 pci_enable_msi+0x356/0x520
Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype iptable_filter xt_conntrack nf_nat nf_conntrack libcrc32c crc32c_generic br_netfilter bridge stp llc overlay nvidia(PO) cfg80211 rfkill rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 nfs lockd grace fscache af_packet uinput binfmt_misc nls_utf8 nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm irqbypass nouveau crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support aesni_intel i915 mxm_wmi aes_x86_64 efi_pstore wmi snd_hda_intel crypto_simd ttm glue_helper cryptd snd_hda_codec efivars nvidiafb
snd_hda_core pcspkr sg snd_hwdep evdev vgastate drm_kms_helper fb_ddc mei_wdt input_leds joydev battery snd_pcm drm snd_timer intel_gtt snd i2c_algo_bit tpm_infineon soundcore tpm_tis lpc_ich tpm_tis_core video button shpchp tpm acpi_cpufreq it87 hwmon_vid coretemp parport_pc ppdev lp parport sunrpc efivarfs ip_tables x_tables ipv6 crc_ccitt autofs4 hid_generic usbhid ext4 crc16 mbcache jbd2 fscrypto sd_mod ahci libahci xhci_pci libata i2c_i801 ehci_pci r8169 crc32c_intel scsi_mod i2c_core mii ehci_hcd xhci_hcd fan thermal rtc_cmos
CPU: 1 PID: 1400 Comm: Xorg Tainted: P O 4.14.0-14.1-liquorix-amd64 #1 liquorix 4.14-18
Hardware name: Gigabyte Technology Co., Ltd. B85M-D3H/B85M-D3H, BIOS F15 08/20/2015
task: ffff8803fc905cc0 task.stack: ffffc90003000000
RIP: 0010:pci_enable_msi+0x356/0x520
RSP: 0018:ffffc90003003b60 EFLAGS: 00010202
RAX: 0000000000000004 RBX: ffff8803fc8d5800 RCX: 0000000000000060
RDX: 0000000000000001 RSI: 0000000000000206 RDI: ffff88041b575000
RBP: ffffc90003003c00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000000248e0 R12: 00000000ffffffea
R13: ffff8803fc8d5a10 R14: ffff8803fc8d5a10 R15: ffff8803fc8d5800
FS: 00007fd1d9da7500(0000) GS:ffff88042e240000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffe124eff8 CR3: 0000000402e2a004 CR4: 00000000001606e0
Call Trace:
? pci_read_config_byte+0x38/0x50
nv_open_device+0x667/0x7a0 [nvidia]
? __slab_alloc.isra.29+0x22/0x40
? nvidia_open+0x1bb/0x3a0 [nvidia]
nvidia_open+0x1bb/0x3a0 [nvidia]
nvidia_frontend_open+0x48/0x90 [nvidia]
chrdev_open+0xa9/0x200
vfs_open+0x1de/0x320
path_openat+0x5b8/0x1910
? link_path_walk+0x6c/0x5a0
do_filp_open+0x84/0x120
? __check_object_size+0x98/0x190
? __alloc_fd+0x19d/0x320
? SyS_openat+0x1cb/0x2d0
SyS_openat+0x1cb/0x2d0
entry_SYSCALL_64_fastpath+0x24/0x87
RIP: 0033:0x7fd1d751968e
RSP: 002b:00007fffe124f210 EFLAGS: 00003246
Code: b1 c5 fc ff e9 b0 fe ff ff 48 8b 45 18 0f b6 75 48 41 f7 d5 44 89 ea 45 89 ec 48 8d b8 60 ff ff ff e8 6f 3e fc ff e9 5c ff ff ff ff e9 29 fd ff ff 41 bc ea ff ff ff e9 c7 fe ff ff 41 bc f4
---[ end trace 112bb386f1084c9b ]---
NVRM: failed to enable MSI. Therefore, using PCIe virtual-wire interrupts.
NVRM: request_irq() failed (-22)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.34 Tue Nov 21 02:09:45 PST 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1730 at /build/linux-liquorix-4.14/drivers/pci/msi.c:1031 pci_enable_msi+0x356/0x520
Modules linked in: nvidia_drm(PO) nvidia_modeset(PO) ipt_MASQUERADE nf_nat_masquerade_ipv4 nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype iptable_filter xt_conntrack nf_nat nf_conntrack libcrc32c crc32c_generic br_netfilter bridge stp llc overlay nvidia(PO) cfg80211 rfkill rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 nfs lockd grace fscache af_packet uinput binfmt_misc nls_utf8 nls_cp437 vfat fat intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel snd_hda_codec_hdmi kvm irqbypass nouveau crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hda_codec_realtek snd_hda_codec_generic iTCO_wdt iTCO_vendor_support aesni_intel i915 mxm_wmi aes_x86_64 efi_pstore wmi snd_hda_intel crypto_simd ttm glue_helper
cryptd snd_hda_codec efivars nvidiafb snd_hda_core pcspkr sg snd_hwdep evdev vgastate drm_kms_helper fb_ddc mei_wdt input_leds joydev battery snd_pcm drm snd_timer intel_gtt snd i2c_algo_bit tpm_infineon soundcore tpm_tis lpc_ich tpm_tis_core video button shpchp tpm acpi_cpufreq it87 hwmon_vid coretemp parport_pc ppdev lp parport sunrpc efivarfs ip_tables x_tables ipv6 crc_ccitt autofs4 hid_generic usbhid ext4 crc16 mbcache jbd2 fscrypto sd_mod ahci libahci xhci_pci libata i2c_i801 ehci_pci r8169 crc32c_intel scsi_mod i2c_core mii ehci_hcd xhci_hcd fan thermal rtc_cmos
CPU: 0 PID: 1730 Comm: Xorg Tainted: P W O 4.14.0-14.1-liquorix-amd64 #1 liquorix 4.14-18
Hardware name: Gigabyte Technology Co., Ltd. B85M-D3H/B85M-D3H, BIOS F15 08/20/2015
task: ffff8804160b8000 task.stack: ffffc900026a4000
RIP: 0010:pci_enable_msi+0x356/0x520
RSP: 0018:ffffc900026a7b60 EFLAGS: 00010202
RAX: 0000000000000004 RBX: ffff8803fc8d5800 RCX: 0000000000000060
RDX: 0000000000000001 RSI: 0000000000000206 RDI: ffff88041b575000
RBP: ffffc900026a7c00 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 00000000000248e0 R12: 00000000ffffffea
R13: ffff8803fc8d5a10 R14: ffff8803fc8d5a10 R15: ffff8803fc8d5800
FS: 00007f6979a47500(0000) GS:ffff88042e200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffcd14f7f78 CR3: 00000003f8442001 CR4: 00000000001606f0
Call Trace:
? pci_read_config_byte+0x38/0x50
nv_open_device+0x667/0x7a0 [nvidia]
? __slab_alloc.isra.29+0x22/0x40
? nvidia_open+0x1bb/0x3a0 [nvidia]
nvidia_open+0x1bb/0x3a0 [nvidia]
nvidia_frontend_open+0x48/0x90 [nvidia]
chrdev_open+0xa9/0x200
vfs_open+0x1de/0x320
path_openat+0x5b8/0x1910
do_filp_open+0x84/0x120
? __check_object_size+0x98/0x190
? __alloc_fd+0x19d/0x320
? SyS_openat+0x1cb/0x2d0
SyS_openat+0x1cb/0x2d0
entry_SYSCALL_64_fastpath+0x24/0x87
RIP: 0033:0x7f69771b968e
RSP: 002b:00007ffcd14f8250 EFLAGS: 00003246
Code: b1 c5 fc ff e9 b0 fe ff ff 48 8b 45 18 0f b6 75 48 41 f7 d5 44 89 ea 45 89 ec 48 8d b8 60 ff ff ff e8 6f 3e fc ff e9 5c ff ff ff ff e9 29 fd ff ff 41 bc ea ff ff ff e9 c7 fe ff ff 41 bc f4
---[ end trace 112bb386f1084c9c ]---
resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
caller _nv001193rm+0x166/0x1c0 [nvidia] mapping multiple BARs
NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-240a75ad-f250-34a1-3a1a-70a0aacacca3) @ PCI:0000:01:00.0
random: crng init done
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 241